Once filled with Butane adjust right (-) till off and then slowly adjust left (+) until desired flame size is achieved.
Push refill nozzle firmly all the way into the Solopipe refill valve . Be sure it fits snuggly, and there is no butane leaking out when pressure is applied.
Now charge down in short 2 second bursts for a total of 5 or 6 times.
The shake the Solopipe slightly to allow for the gas to distribute throughout the pipe’s interior tubing.
Wait until the Solopipe returns to room temperature before igniting (5-10 minutes is recommended). This allows for time for the gas to expand and fizzle out the air bubbles that are possibly generated in the filling process.
Reset the flame height adjuster to proper position which is no more than 1 inch (1.5 cm). Note, however, that outside temperature & altitude may cause the flame height to vary, so adjust accordingly.
To adjust the flame size dial the + or – by the mouthpiece to your preferred flame size and enjoy!
