Ripper Instructions

Solopipe Ripper Instructions

Real Flower. Real Smoke. Instant Combustion.

Ripper is a rechargeable electric combustion pipe designed for legal dry flower.

There’s no separate lighter, no butane reservoir, and no open flame.

Load. Press. Rip.

Getting Started

1. Power On

Ripper comes charged and ready to use.

Quickly press the power button 5 times to turn Ripper on.

To turn Ripper off, quickly press the power button 5 times again.

For safety, if Ripper is powered on and the power button is activated accidentally, the heating cycle will automatically shut off after 10 seconds.

If the battery indicator shows that Ripper needs charging, connect it using the included USB-C cable.

How to Use Ripper

1. Power On

Quickly press the power button 5 times.

2. Load

Place legal dry flower into the removable glass flower chamber.

No grinding required. Whole flower works.

For best performance:

  • Load dry flower directly into the chamber.

  • Keep enough airflow through the chamber.

  • Do not overpack.

3. Press

Press and hold the ignition button to activate the electric heating element.

Ripper uses electronic ignition to combust the flower directly.

The heating cycle automatically stops after 10 seconds if the button remains activated.

4. Rip

Inhale while the heating element is engaged.

Release the button when you are finished with your draw.

Allow the chamber to cool before touching, clearing, or repacking it.

5. Power Off

When you are finished, quickly press the power button 5 times to turn Ripper off.

Charging Your Ripper

Ripper comes charged and ready to use out of the box.

When the battery needs charging:

  • Connect Ripper using the included USB-C charging cable.

  • Use a standard USB power adapter, laptop, or power bank.

  • The 5-bar battery display shows the approximate battery level.

  • If the battery becomes completely drained, allow it to charge before trying again.

Do not charge the device unattended overnight.

After Each Session

Once Ripper has cooled:

  1. Tap out the spent flower.

  2. Use the included cleaning tool to clear loose material from the chamber.

  3. Keep the airflow pathway clear.

  4. Avoid touching or poking the heating element directly.

  5. Press the power button 5 times to make sure Ripper is turned off before storing it.

Regular cleaning helps maintain airflow and consistent ignition.

How to Clean Your Ripper

Important

Never poke the heating element with the cleaning tool or any other object.

Damage to the heating element can affect performance.

Regular Cleaning

  • Make sure Ripper is powered off and completely cool.

  • Remove loose material from the chamber.

  • Use the included cleaning tool around the chamber walls.

  • Avoid direct contact with the heating element.

  • Wipe the exterior with a dry or barely damp cloth.

For Stubborn Residue

Use a cotton swab lightly dampened with 99% isopropyl alcohol around the chamber.

Allow all surfaces to dry completely before using the device again.

Cleaning the Heating Element

Do not scrape or poke the element.

If residue builds up on the heating element, run Ripper empty for 1–2 heating cycles to help burn off residue.

Never submerge Ripper or rinse it under running water.

Troubleshooting

Ripper Won’t Turn On

  • Quickly press the power button 5 times.

  • Make sure the presses are performed in quick succession.

  • Check the battery indicator.

  • If the battery is low, charge Ripper and try again.

Ripper Won’t Ignite

First make sure Ripper is powered on.

If the battery has charge:

  • Allow the device to cool.

  • Clear excess material from the chamber.

  • Check for buildup around the heating element.

  • Do not poke the heating element.

  • If needed, run the device empty for 1–2 heating cycles.

Ripper Shuts Off After 10 Seconds

This is normal.

Ripper includes a 10-second automatic shutoff for the heating cycle.

If the power button is held or activated accidentally, the heating element will automatically stop after 10 seconds.

Release the button and begin another heating cycle when ready.

Weak or Uneven Burn

If the flower is not burning evenly:

  • Remove excess material from the chamber.

  • Repack without overfilling.

  • Check that the chamber and airflow pathway are clean.

  • Make sure sufficient airflow remains through the chamber.

Grinding is not required. Whole flower can be used directly in Ripper.

Ripper Won’t Charge

Try the following:

  • Try another USB-C cable.

  • Try another standard USB power adapter.

  • Inspect the USB-C charging port for debris.

  • Gently clear visible debris using a dry swab.

Do not insert metal objects into the charging port.

Safety & Care

  • For adult use only.

  • Use only with legal dry flower where permitted.

  • Press the power button 5 times to turn Ripper on and 5 times to turn it off.

  • The heating cycle automatically shuts off after 10 seconds.

  • Turn Ripper off before placing it in a pocket, bag, or case.

  • The chamber and heating area become hot during use.

  • Allow the device to cool before cleaning or repacking.

  • Do not poke or modify the heating element.

  • Keep away from children and pets.

  • Do not drop, crush, puncture, burn, modify, or attempt to repair the battery.

  • Ripper can tolerate normal incidental exposure to moisture, but it is not waterproof or submersible.

  • Never place the device in standing water or rinse it under running water.

  • Do not charge unattended overnight.

Ripper Specifications

Product type: Rechargeable electric combustion pipe
Designed for: Legal dry flower
Flower preparation: Grinding not required; whole flower works
Technology: True combustion — not vaporization
Power control: 5 clicks on / 5 clicks off
Heating safety: 10-second automatic shutoff
Heat source: Electric heating element
Open flame: None
Fuel required: None
Battery: 600 mAh rechargeable lithium battery
Charging: USB-C
Battery display: 5-bar indicator
Body: Anodized aluminum
Dimensions: Approximately 111 × 41 × 26 mm
Weight: Approximately 105 g

What’s Included

  • Solopipe Ripper

  • USB-C charging cable

  • Cleaning tool

  • Product instructions / safety information

Still Have Questions?

Need help getting your Ripper set up or troubleshooting an issue?

Contact Solopipe Customer Support and we’ll help get you back up and running.

Real Flower. Real Smoke. Instant Combustion.