Ignite your life
Ignite your life
because your pocket just got a little lighter. Half lighter + half pipe = 100% awesome
Original Solopipe Instructions
Solopipe, inc has been designing and manufacturing ingenious self contained lighter-pipes and high quality smoking accessories in the US since 2007. Check out the original Solopipe or our next gen windproof butane free Elektra.
Original Solopipe
Starting Off
Solopipe ships empty. You must fill it with butane yourself before you can use it. Use at least 5x refined butane as butane can effect Solopipe working properly. We highly recommend using Vector 14 or Newport butane
Original Solopipe
Fill with Butane
- Push refill nozzle firmly all the way into the Solopipe refill valve . Be sure it fits snuggly, and there is no butane leaking out when pressure is applied.
- Now charge down in short 2 second bursts for a total of 5 or 6 times.
- The shake the Solopipe slightly to allow for the gas to distribute throughout the pipe’s interior tubing.
Original Solopipe
First Ignition
Wait until the Solopipe returns to room temperature before igniting (5-10 minutes is recommended). This allows for time for the gas to expand and fizzle out the air bubbles that are possibly generated in the filling process.
Original Solopipe
Adjust
- Reset the flame height adjuster to proper position which is no more than 1 inch (1.5 cm). Note, however, that outside temperature & altitude may cause the flame height to vary, so adjust accordingly.
- To adjust the flame size dial the + or – by the mouthpiece to your preferred flame size and enjoy!
Still have questions?
No worries! Just reach out to us here: info@solopipe.com and we will get right back to you. Your satisfaction is guaranteed!